Does your well need water treatment? There are many types of filters available in the market. But before you make a purchase, it is necessary to understand what options are available and be aware of the common mistakes you should avoid.
Which well water treatment systems are available?
A large number of people in Florida rely on private wells. This includes water for drinking, bathing, cooking, washing, and other home consumption needs. Unlike public water systems, private wells are the responsibility of the homeowner. They are the ones who will check and ensure the safety of their own drinking water.
Well-water should be tested at a certified laboratory annually. The most common contaminants in Florida wells are bacteria and nitrates. It is important to find out the contaminants of your water to find the best solution. Moreover, one should know that no treatment system or filter can 100% eliminate all contaminants in the water. Besides, there is no particular kind that uses the same technology. The water treatment options that you have are the following:
Filtration
This device removes impurities utilizing either physical barriers, chemical, biological, or a combination of these processes.
Distillation
For solid contaminants, this system works best. It is a process where the water is boiled; then, the steam is collected and condensed in a separate container. What’s left behind are the contaminants.
Disinfection
This water treatment uses chemical or physical disinfectants to deactivate or kill pathogenic microorganisms. For chemical disinfectants, chlorine, chlorine dioxide, and ozone are used. On the other hand, physical processes use heat, electronic radiation, and ultraviolet light.
Water Softeners
To reduce the hardness of water, this option is used. In detail, sodium or potassium ions are used to replace the magnesium and calcium ions that create the ‘hardness.’
Avoid these mistakes when choosing the best well water treatment
For the best water supply possible, it is crucial to avoid common mistakes in selecting a suitable well water treatment. There are several things that you should take into consideration before making the final decision. Check out the following:
Not checking water pressure
Wells have different flow rates, and this affects your choice of filtration system. The general rule that determines adequate water supply is approximately five gallons per minute. If the well pump produces less water than what the filtration system requires, it won’t work properly.
Not understanding how your water system works
Not all wells are the same, especially in the way they operate. You should know how the water is pulled from the ground and where it goes. Is it stored in a holding tank, directly to the house, or is it gravity fed? Knowing this will aid you in picking the right water treatment system.
Not opting for a high-quality well water treatment
The health and safety of your family should be the priority. Don’t settle for cheaper well water treatment systems to save a few bucks. Chances are, they’re not going to work as well compared to those high-quality ones that cost a bit more. Worse is, it could put everyone in danger if the water in your well has serious contaminants.
Final Thoughts
Not all water treatment systems can address every single pollutant and contaminants. It is crucial that the one you have chosen is checked and verified by professionals. Contact SWFL Service & Supply whenever you need help choosing a well water treatment suitable for your home.